Feedback
If you have any needs please leave us a message
Contact Us
86-0755-82783379
[ Online 8:30-17:30 ]

Solution

Location:Home > NEWS CENTER > Solution

What parameters setting is needed before printing?

Date:2016-01-14 Hits:349
There are 4 parameters setting:
a.Layer thickness:0.1 mm or 0.2 mm
b.Printing speed:60~80 mm/s
c.Loading level (If the wall thickness is bigger than 1.2mm,you need to choose the loading level at 20%)
d.Types of support (when there is a dangling parts of the model)