MINGDA High Performance 3D Filament/Printing Service

MINGDA have a leading high-performance 3d printing filament system, which meets functional requests such as high strength, high toughness, temperature resistance, friction resistance, corrosion resistance, insulation and fire proofing, etc to meet differents customers need. We also provide 3D printing services before purchase to get the most intuitive trial experience, please contact us for the most professional material advice, and get a offter for 3d printing service or filament.

Materials
MINGDA 3D Printing filaments

MINGDA 3D Printing Materials allows you to have an excellent printing experience: with our guidance in pre/pro-processing, you will obtain a detailed and good-surface finished print prototype.
Our 3D Printing Materials are independently developed and using our MINGDA 3D Printers, the filament will be able to outperform well and provide you with an amazing experience and performance for your parts or prototypes.

High-Performance Materials

MINGDA 3D High Performance 3D Printing Materials allow you to print industrial-grade parts and have superior-performance under ultra-lightweight conditions. These materials have excellent mechanical, thermal, electrical properties and also excellent biocompatibility compare to the ordinary polymer.
 The figure on the right shows a set of samples of the same designed printed by MINGDA 3D High-Temperature Printer using different high-performance materials.

If you need more information, feel free to contact us.

Inquiry

HtPA-CF

Smart Fiber Reinforced Technology
MINGDA controlling the dispersion and distribution of chopped carbon fibers within the material matrix during the extrusion process, the fibers form a mesh skeleton structure within the material and bear most of the load transferred by the material matrix. Smart Fiber Reinforced Technology greatly improves the mechanical properties and heat resistance of the material, and releases the internal stress during the printing process through the fiber mesh structure, resulting in good dimensional stability of the printed part and no warpage.
Low Moisture Sensitivity
HtPA-CF based on modified PA12 long-chain nylon, whose saturated moisture absorption rate is only one tenth of ordinary PA6, completely solving the defects of the mechanical properties and dimensional stability of nylon materials that change greatly after absorbed moisture.
Super Abrasive Resistance
HtPA-CF has a low coefficient of friction, self-lubricating properties and excellent wear resistance, which can easily meet all kinds of high-strength gears or industrial applications with high wear requirements.

LEARN MORECONTACT US TDS

HtPA-GF

Smart Fiber Reinforced Technology
MINGDA controlling the dispersion and distribution of chopped carbon fibers within the material matrix during the extrusion process, the fibers form a mesh skeleton structure within the material and bear most of the load transferred by the material matrix. Smart Fiber Reinforced Technology greatly improves the mechanical properties and heat resistance of the material, and releases the internal stress during the printing process through the fiber mesh structure, resulting in good dimensional stability of the printed part and no warpage.
Low Moisture Sensitivity
HtPA-GF based on modified high temperature nylon, whose saturated moisture absorption rate is only one tenth of ordinary PA6, completely solving the defects of the mechanical properties and dimensional stability of nylon materials that change greatly after absorbed moisture.
Super Abrasive Resistance
HtPA-GF has a low coefficient of friction, self-lubricating properties and excellent wear resistance, which can easily meet all kinds of high-strength gears or industrial applications with high wear requirements.

LEARN MORECONTACT US TDS

PA12-CF

Smart Fiber Reinforced Technology
MINGDA controlling the dispersion and distribution of chopped carbon fibers within the material matrix during the extrusion process, the fibers form a mesh skeleton structure within the material and bear most of the load transferred by the material matrix Smart Fiber Reinforced Technology greatly improves the mechanical properties and heat resistance of the material, and releases the internal stress during the printing process through the fiber mesh structure, resulting in good dimensional stability of the printed part and no warpage.
Low Moisture Sensitivity
PA12-CF based on modified PA12 long-chain nylon, whose saturated moisture absorption rate is only one tenth of ordinary PA6, completely solving the defects of the mechanical properties and dimensional stability of nylon materials that change greatly after absorbed moisture.
Low Density
PA12-CF is the one of the lowest density FDM industrial printing material, which can easily meet the high strength and lightweight requirements of industrial applications.
Super Abrasive Resistance
PA12-CF has a low coefficient of friction, self-lubricating properties and excellent wear resistance, which can easily meet all kinds of high-strength gears or industrial applications with high wear requirements.

LEARN MORECONTACT US TDS

HtPA

Low Moisture Sensitivity
HtPA based on modified high temperature nylon, whose saturated moisture absorption rate is only one tenth of ordinary PA6, completely solving the defects of the mechanical properties and dimensional stability of nylon materials that change greatly after absorbed moisture.
Strongest layer bonding performance
HtPA have the best layer strength in MINGDA product catalog, the layer adhesion of single wall structure is 2-3 times of ABS material and 1.5 times of PLA material.
Super Abrasive Resistance
HtPA has a low coefficient of friction, self-lubricating properties and excellent wear resistance, which can easily meet all kinds of high-strength gears or industrial applications with high wear requirements.

LEARN MORECONTACT US TDS

PET-CF

Smart Fiber Reinforced Technology
MINGDA controls the dispersion and distribution of reinforced carbon fibers in the material matrix during the extrusion process, thus the fibers form a mesh skeleton structure within the material and bear most of the load transferred by the material matrix. Smart Fiber Reinforced Technology greatly improves the mechanical properties and heat resistance of the material and releases the internal stress during the printing process through the reinforced fiber mesh structure, so that the print has good dimensional stability and no warpage problem.
Low creep
The molecular chain structure of PET is highly regular and has a rigid benzene ring structure so that PET has better mechanical properties and less deformation under long-term load. Compared with PA and PC materials, PET has better creep-resistance.

LEARN MORECONTACT US TDS

PET-GF

Smart Fiber Reinforced Technology
MINGDA controls the dispersion and distribution of reinforced carbon fibers in the material matrix during the extrusion process, thus the fibers form a mesh skeleton structure within the material and bear most of the load transferred by the material matrix. Smart Fiber Reinforced Technology greatly improves the mechanical properties and heat resistance of the material and releases the internal stress during the printing process through the reinforced fiber mesh structure, so that the print has good dimensional stability and no warpage problem.
Low creep
The molecular chain structure of PET is highly regular and has a rigid benzene ring structure, so that PET has better mechanical properties and less deformation under long-term load. Compared with PA and PC materials, PET has better creep-resistance.

LEARN MORECONTACT US TDS

PETG-ESD

PETG-ESD is a kind of 3D printing consumable with anti-static function, and it has good printability and balanced mechanical performance.

LEARN MORECONTACT US TDS

ASA

Low Odor
ASA gives out minimal odor compared with other traditional ABS filaments during printing. It is more suitable for 3D printing hobbyists
UV Resistance
ASA can resist material degradation, aging and color fading which are caused by resistance. It Is aging resistance can be 10 times higher than that of traditional ABS filaments.

LEARN MORECONTACT US TDS

TPU-95A

TPU95A Hardness 95A, supports high-speed printing up to 120mm/s

TPU-Foam

TPU-Foam foamed TPU, lightweight, density as low as 0.7g/cm3

PLA-Aero

MINGDA PLA-Aero is specially developed for aircraft model, ship model, UAV and other fields, providing a lightweight 3D printing consumable. PLA-Aero controls the foaming ratio of the material by adjusting the temperature during the printing process, so that the density of the consumables extruded by the nozzle can be adjusted within a certain range, reducing the weight of the model, and in the best case, it can be reduced to 50% of the ordinary PLA printing model; The matte texture of the printed surface can also reduce the layering phenomenon to a certain extent.

LEARN MORECONTACT US TDS

Support Materials

Solution of industry-grade fiber reinforced materials and supporting materials


LEARN MORECONTACT US TDS

MINGDA Support F-Green

Smart Adhesion Technology
Support F-Green can provide a moderate bond strength to the body material through formulation and process modifications, which ensures that the body material can be molded to the support surface and can be easily separated from the support surface of the body material during removal of the support.
Quick Remove Technology
Support F-Green has dramatically reduced its own interlayer bond strength through formulation and process modifications, and can be easily teared apart during removal process.
ECO Friendly
The Support F-Green does not reguire the use of water or solvents during the use process, does not produce water pollution, and is safe and environmentally friendly.

MINGDA Support F-Purple

Smart Adhesion Technology
Support F-Purple can provide a moderate bond strength to the body material through formulation and process modifications, which ensures that the body material can be molded to the support surface and can be easily separated from the support surface of the body material during removal of the support.
Quick Remove Technology
Support F-Purple has dramatically reduced its own interlayer bond strength through formulation and process modifications, and can be easily teared apart during removal process.
ECO Friendly
The Support F-Purple does not require the use of water or solvents during the use process, does not produce water pollution, and is safe and environmentally friendly.

MINGDA Support F-Blue

Smart Adhesion Technology
Support F-Blue can provide a moderate bond strength to the body material through formulation and process modifications, which ensures that the body material can be molded to the support surface and can be easily separated from the support surface of the body material during removal of the support.
Quick Remove Technology
Support F-Blue has dramatically reduced its own interlayer bond strength through formulation and process modifications, and can be easily teared apart during removal process.
ECO Friendly
The Support F-Blue does not reguire the use of water or solvents during the use process, does not produce water pollution, and is safe and environmentally friendly.

Related file download

Innovative additive manufacturing for customer success

Product instruction download

MINGDA Technical Parameters of High-performance Printing Filaments

Download

Why Choose Our Filament

We provide the 3D Printing Filament in the most afforable price.

All 3D Printing Filament is developed by ourself and have obtained CE and RoHS Certification.

We also partner with different material companies to produce the higest quality materials for the users.

We provide the specification for each materials, thus you will not take much effort to figure out what is the most suitable parameters for that certain materials and start your print soon.