sep

Support System

How to slice in support Mode on MD-400D ?

Printing size: 400 * 400 * 400mm

Selecting the MingDa 400D 0.4 nozzle (Dual)

1. On the left side of the interface, in the filaments column, click "+" to add another filament.
2. Choose and modify the filament information.
3. Then, select the "Support" section.
4. Check the "Enable support" option.
5. In the "Filament for Supports" option, choose the filament needed for supports.
6. Click "Slice plate" to preview.

CATEGORY

Dec 24, 2020

#INSPIRATION

#CATEGORY

CATEGORY

Dec 24, 2020

Double extrusion: Start the Prime tower

Because there is always one printer in standby mode during the printing process, it is easy to cause defects such as wire drawing and material leakage. Prime tower can solve this problem, the extruder will print a prime tower before each layer printing. Any material leakage will be printed on the tower, effectively avoiding the phenomenon of material leakage when replacing the extruder.

If you want to print the following two modes, we recommend adding this option to your Gcode.

1. Select the "Others" section.
2. Check the "Enable" option in the "Prime tower" settings.

Note: The printing position of the Prime tower cannot coincide with the model

#INSPIRATION

#CATEGORY

CATEGORY

Dec 24, 2020

In the printer interface:

Note: When printing models with supports, the printer will automatically switch to Auto-park Mode.

Return to the main interface, select "Print.", Insert the U-disk, Choose the print file for printing.

#INSPIRATION

#CATEGORY

This website uses cookies to ensure you get the best experience on our website.

Accept Reject